Last updated November 2026. Reviewed by Vickie Roberts, Director of Sales at Porter Freight Funding.

Power only trucking means a carrier provides only the tractor and driver, and the shipper, broker or 3PL provides the trailer. The driver hooks to a preloaded trailer, hauls it to the receiver and often drops it there. Because you don’t buy or lease a trailer, your startup costs and maintenance stay lower.

Power Only Trucking at a Glance

You supply Tractor, driver, authority, insurance
They supply The trailer (van, reefer or flatbed, depending on the program)
Typical loads Preloaded drop trailers, drop and hook freight, trailer repositioning
Rate range Below the dry van spot rate, since you aren’t supplying the trailer. DAT’s national dry van rate was $2.26 per mile in October 2026.
Startup cost Lower than a standard carrier: no trailer purchase or trailer payment
Best fit New authorities, owner-operators and small fleets that want to haul without owning trailers

How Power Only Trucking Works

  1. Get set up. Run under your own MC authority or lease onto a carrier, with the insurance the program requires.
  2. Join a trailer program. Brokers, 3PLs and shippers keep trailer pools and vet the carriers who pull them.
  3. Book the load. Find power only loads through broker programs or load boards that tag them.
  4. Hook the trailer. Pick up a preloaded trailer at the shipper or a drop lot, so you skip the wait at the dock.
  5. Deliver and drop. Drop the trailer at the receiver or a yard and pick up the next one if it’s ready.
  6. Invoice. Send the rate confirmation and signed bill of lading to the broker, then wait on their terms or factor the invoice.

Pros and Cons of Power Only

Pros Cons
No trailer to buy, insure or maintain Usually pays less per mile than hauling with your own trailer
Less dock waiting with preloaded trailers You depend on the program’s trailer supply and freight
Haul van, reefer or flatbed freight without owning each trailer You still own the pre-trip inspection on a trailer you didn’t choose
Faster way to get a new authority moving Deadhead to and from trailer pools can eat into margin

Power Only Rates in 2026

Power only pay moves with the van market. DAT’s national dry van spot rate was $2.26 per mile for the week ending October 17, 2026, linehaul only, up $0.58 from a year earlier (DAT Dry Van Report). Power only loads usually pay below that because you aren’t supplying the trailer. Short runs usually pay more per mile than long hauls, but deadhead to and from the trailer pool can eat the difference, so price the round trip, not the loaded miles.

Run your numbers before you book. Our guide to calculating your trucking cost per mile walks through it.

How to Start Power Only Trucking

  • Authority: a USDOT number and MC authority, or a lease onto a carrier. See How to Get a Trucking Authority.
  • Insurance: auto liability and cargo, plus trailer interchange coverage, which most programs require when you pull a trailer you don’t own.
  • Loads: broker and shipper trailer programs, and load boards that filter for power only.
  • Broker checks: check a broker’s credit before you haul, and watch for double brokering.

Day Cab or Sleeper for Power Only?

Your tractor decides which power only loads you can take. A day cab keeps you local and home every night. A sleeper lets you book multi-day runs and chase freight across the country. Pick based on how you want to live, then choose programs that fit.

Factor Day Cab Sleeper Cab
Where you sleep At home or in a hotel In the truck, with a bed, storage and power
Typical radius Local or regional, usually under 250 to 300 miles Regional or over the road, 500 miles and up
Cost Lower purchase price, lighter, better fuel mileage, cheaper to insure and maintain Higher upfront cost, heavier tractor, more fuel, APU to maintain
Payload About 2,000 to 4,000 pounds lighter, so you can haul slightly heavier loads under federal weight limits Less payload headroom
Maneuverability Shorter wheelbase for tight city yards Longer wheelbase needs wider turns at tight docks
Power only fit Short relay runs and single-shift blocks that start and end near your home yard Multi-day tours, cross-country routes and back-to-back spot loads across states
When freight dries up You wait it out or pay for hotels to chase loads elsewhere You deadhead to a stronger market and stay out until rates improve

Most new power only carriers start with a day cab because it costs less to get rolling. If you plan to run long trailer-pool lanes, a sleeper pays for itself in load options.

How to Get Paid Faster on Power Only Loads

Power only carriers turn loads fast, so waiting 30 to 60 days on a broker can stall the next one. Freight factoring pays you on the invoice instead. With Porter, power only carriers get:

  • Same-day funding by ACH, wire or fuel card
  • Up to 100% advances on approved invoices
  • A 1.5% introductory factoring rate for the first 60 days*
  • Paid at pickup: up to 50% of load value per truck through PorterWallet 24/7 Advances, once your docs are submitted
  • Instant broker credit checks before you haul, once you’re a Porter customer

Every Porter account comes with support from our Account Resolution Team, access to 24/7 Advances through PorterWallet, and the option to enroll in our PorterFuel Card.

*The 1.5% introductory rate applies to your first 60 days and requires a 1-year recourse contract with a 95% advance rate. It does not apply to Sprinter Vans or Box Trucks. Advances on approved invoices, subject to underwriting approval.

“Before you sign up with a drop and hook relay, find out who pays you and how fast. Some of the biggest programs don’t work with factoring companies at all, and that changes your cash flow on day one.”

Vickie Roberts, Director of Sales, Porter Freight Funding

One thing to know before you choose a program: Porter does not factor Amazon loads, so if you plan to run Amazon Relay, those invoices won’t qualify. Porter is based out of Birmingham, Alabama. Carriers with an existing MCA loan are typically declined, and we don’t factor carriers based in CA, PR, HI, AK, Canada or Mexico.

Get a Power Only Rate Quote

Know another power only carrier? Refer them to Porter and get paid when they fund.

Power Only Trucking FAQs

It means the carrier supplies only the power unit (the tractor) and the driver. The shipper, broker or 3PL supplies the trailer.
A broker, 3PL or shipper keeps a pool of trailers at shipper yards and drop lots. Approved carriers hook preloaded trailers from the pool and drop them at the receiver.
Yes, unless you lease onto a carrier. Programs vet your authority, safety record and insurance before you can pull their trailers.
Most programs require you to carry trailer interchange coverage for damage to a trailer you don’t own. Check the program’s requirements before you book.
It can be, because you skip trailer payments and maintenance. Profit depends on your rate per mile, deadhead and how fast you get paid.
Yes. Porter factors power only loads with same-day funding and up to 100% advances on approved invoices. See power only factoring.
No. Porter does not factor Amazon loads. Power only loads from other brokers, 3PLs and shippers are eligible.
Yes. Day cabs fit local and regional power only runs under about 300 miles that get you home nightly. For multi-day trailer-pool lanes you’ll need a sleeper.